Enabling organisational settings
Organisational settings can be enabled or disabled using a toggle switch.
Enabled: These settings are applied to new devices. Changes are applied to both new and existing devices.
If a combination of organisation-wide settings and individual device settings is used, the most recently changed settings always take precedence.
Disabled: The organisation-wide settings are not applied to new devices.
Applying changes to the camera
Please note that any changes made to the settings in SPEDIONline will only be applied to the camera after a short delay.
Device settings
- Click Settings > Organization Settings.
- Click Device settings.
- Configure the settings as required.
- Click Save.
Overview device settings
| Setting | Explanation |
|---|---|
| Audio Recording | This setting enables the recording of audio in both the front and the cabin of the vehicle. |
| Enable Distracted Driver | This setting enables or disables MV+AI related events when the driver is distracted. |
| Enable Audio Alerts | This setting enables audio alerts in the vehicle when there is a risky driving event. |
| In Cabin Recordings | This setting enables or disables video recording from the in-cab lens. |
| Video Text Overlay | This setting enables or disables the text overlay on the video. |
| Speed Units in Text Overlay | This setting determines the speed units to be used on the video recording. |
| Time Format | This setting determines the time format in video recordings. |
| Enable Live Video Streaming | This setting enables live video streaming from the vehicle. |
| Idle Minutes to Enter Standby | This setting sets the minutes from when the vehicle stops moving until the dashcam enters Standby mode. In Standby mode, the dashcam does not stream live video, record video, or upload video events, until the camera exits standby mode. The minutes to enter standby are between two to sixty. |
| Drivers Camera | Disable the option to stop recoding with the in-cab lens. When set to off, there are no recordings even if 'Enable Distracted Driver' is set to on. The 'Drivers Camera' setting takes precedence. |
| Driver Position | Set to left or right to indicate the side on which the driver seat is located. This is important for MV+AI and distracted driving functionality. |
| Virtual Ignition | This setting enables virtual ignition to start the AI-14 Dashcam. Virtual Ignition offers two approaches to activating the dashcam: - Movement: When the virtual ignition feature is enabled, the dashcam is activated when it detects movement. - Ignition: When virtual ignition is disabled, this leaves true ignition to activate the dashcam. With true ignition the dashcam is activated only when the ignition key is turned, replacing the movement based activation. |
| Screen Timeout | This setting sets the seconds from when the AI-14 Dashcam wakes up until the screen shuts off. The time can range from 10 to 300 seconds. Note: The AI-14 Dashcam records the entire trip, even when the screen is off. |
| Driver Identification | This setting enables or disables driver identification (and assignment) through driver check in and checkout with a unique PIN or QR code specific to that driver. Driver identification can be enabled either for a driver PIN code or a QR code, but not both. |
| Driver Prompt, Audio Alert, Driver Prompt Duration in Seconds | When Driver Identification is enabled, a configurable driver prompt is available, with an optional audio alert. The driver prompt can be customized to time intervals between 10 and 60 seconds. This is required when Driver Prompt in enabled. |
Event settings
- Click Settings > Organization Settings.
- Click Event Settings.
- Configure the settings as required.
You can find more information about events and available settings here. - Click Save.