FAQ
- 15 Mar 2024
- DarkLight
- PDF
FAQ
- Updated on 15 Mar 2024
- DarkLight
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
LED flashing codes
What does the different flashing of the LEDs mean?
Navigate LED
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode, GNSS is working |
| Permanently switched on | GNSS signal is not received |
| Blinking fast constantly | Device firmware is being flashed |
| Off | GNSS is turned off because: - the device does not work or - is in sleep mode |
Status LED
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or device is in boot mode |
TinyFour does not receive a GPS signal
If the Navigate LED is permanently switched on, this means that no GPS signal is found.
Solution:
Check that you have installed the TinyFour with the correct side A facing upwards or forwards.
Make sure that the TinyFour is not positioned underneath metal and as high up as possible.
Was this article helpful?
