Connect TruckBox E
- 04 Dec 2024
- DarkLight
- PDF
Connect TruckBox E
- Updated on 04 Dec 2024
- DarkLight
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Once you have successfully connected the SPEDION cable loom to the FMS interface or the digital tachograph, you still need to connect the TruckBox E to the SPEDION cable loom.
- Check that the serial number and MAC address printed on the device accompanying document correspond to the details on the TruckBox E.
- Connect the Molex jack of the SPEDION cable loom to the SYSTEM connection of the TruckBox E.
- Check the indicator lights on the TruckBox E:
| LED | Colour | Signal | Meaning |
|---|---|---|---|
| 1: Comm | Yellow | Off | GSM not connected → no mobile phone connection |
| 1x flashing | GSM connected → mobile phone connection available | ||
| On | MQTT connected → Connection with SPEDION server available | ||
| 2: Error | Red | Off | No error |
| 1x flashing | Error | ||
| 3: System | Green | Off | System off |
| On | System running | ||
| 4: Data | Orange | Off | No real-time data received |
| 3x flashing | GPS position data missing | ||
| 2x flashing | FMS data missing (GPS available) | ||
| 1x flashing | D8 Data missing (GPS and FMS available) | ||
| On | All real-time data available |
- Fill in the enclosed device accompanying document and send it by e-mail to support@spedion.de.
Creating vehicles
Please note that SPEDION is not responsible for creating the vehicles.
Further information: Create vehicle
Next step: Connect Android device with TruckBox E
Was this article helpful?
