Scope of delivery

Prev Next

TruckBox E

The TruckBox E transmits data from the FMS interface and/or the digital tachograph.

SPEDION TruckBox E cable loom

Functions of the individual cables

Cable Function
Red cable 12V / 24V permanent (Terminal 30) – permanent positive
Black cable Ground (Terminal 31)
Green cable 12V / 24V activated (Terminal 15) – Ignition
Purple cable To the digital tachograph (connector D, pin 8). Responsible for the odometer reading, speed values and driver card number. It can be used either for the current activity in the digital tachograph, trailer recognition or as a digital input.
White cable To the digital tachograph (CAN-Low, connector C, pin 7). Responsible for remote download of driver card and mass storage.
Yellow cable To the digital tachograph (CAN-High, connector C, pin 5). Responsible for remote download of driver card and mass storage.
Black/green cable FMS-CAN-Low. Responsible for all relevant ECO data of the FMS interface and the remote download via the FMS interface.
Yellow/green cable FMS-CAN-High, responsible for all relevant ECO data of the FMS interface and the remote download via the FMS interface.
Molex jack Connection for the TruckBox E
Blue/white cable Connection for Trailer ID Tag (if used)
4-pin Molex jack Optional: If white/yellow/purple are not required, the plug can be disconnected
Blue/red cable Optional: For digital input
Blue cable Optional: For digital input


GPS/GSM antenna

The GPS/GSM antenna is used to locate and transmit data from the TruckBox E.

Functions of the individual cables

Cable Function
FAKRA D (bordeaux) GSM
FAKRA C (blue) GPS


SPEDION PowerAddon

The SPEDION PowerAddon enables the Android device to be powered via the continuous current of the SPEDION cable loom.

You do not need the SPEDION PowerAddon if you install an active bracket in your vehicle and supply the Android device with power via this.

Next step: Select connection option