SIM Karten Tausch

SIM card switch to SPEDION Mobile Data Package with SPEDION Navigation

1. In the Administration(1), select the Vehicle icon (2) in the menu bar .
2. Click on Edit (3) in the desired vehicles line.

3. Select the Device/Vehicle data interface(4) tab.
4. Under Connection to the SPEDION app select Bluetooth(5) and press Save.

5. Select the **Vehicle configuration(6)**tab .
6. Tick theMobile Control Active(7) and SPEDION Navigation(7) Checkboxes(8).

Install SIM card

1. Install the SIM card as described in the article Installing the SIM card.
2. The yellow LED(1) on the TruckBox indicates that a mobile data connection to the SPEDION server is being established.

3. If the yellow LED(1) lights up continuously, there is a mobile data connection and the connection to the SPEDION server is established.
4. Now switch off the Android device.

Android device setup

1. Insert the Nano SIM card into the Android device and switch the device back on.

Delete saved TruckBox Wifi connections

2. On the Android device, swipe the screen from top to bottom to open the Quick-Panel.
   
3. Press and hold the Wifi symbol here to access the Wifi settings.
4. Disconnect the active Wifi connection with the TruckBox. Select the cogwheel of the TruckBox Wifi and confirm with Remove.
   
   
   
   

Log in to SPEDION App

1. Log in to the SPEDION app on your Android device with your vehicle number and driver pin.
   

Confirmation of the safety regulations

1. Read the safety regulations.
2. Select Accept.
   
3. Optional: If necessary, carry out departure checks and other tasks.
4. Optional: If Mobile Control has not yet been activated on the device, the device administrator app starts automatically, here select activate.
   
5. Optional: If consent is required, agree to the Samsung Knox privacy policy with more.
   
6. Confirm the Bluetooth pairing request of the TruckBox with OK.

7. Optional: SPEDION App Update

Perform diagnosis

1. In the SPEDION app, select More functions -> Tools -> Workshop -> Diagnosis.
   
2. Switch on the ignition of the vehicle.
3. Make a comparison of the data. You can compare the mileage under FMS with the mileage on the map on the speedometer or compare the MAC address under Bluetooth with the MAC address on the sticker on the TruckBox.
   
   
4. When the remote download has started, a rotating propeller on the speedometer (see above) indicates that the speedometer is being downloaded.
5. if all points in the SPEDION app diagnostics are green, the SPEDION app is working with the TruckBox via Bluetooth.
   

SPEDION Navigation installation

Everything about installing the SPEDION Navigation.